Fire Hooks Unlimited Gator-Back Hook


The first hook specifically designed for roof work.

Two sharp teeth at each end of the T-head make penetration of 90 lbs. to 180 lbs. roof with little effort. A sharpened chisel on the handle end adds to the functional make-up of the tool. Superior prying capabilities when removing roof boards.

It can also be used as a rail or foot hold after driving the T through the roof. Pushing down ceilings of cocklofts can also be accomplished by using the T as a ram. Excellent overhaul too. Shaft is standard aircraft steel. Exclusive Celtex self extinguishing grips.

Part Number:


  • A regular tapered pike pole head
  • Ten sharpened cross cutting teeth on its back can cut on the pull stroke as well as the push stroke
  • It will cut lath, plaster and sheetrock faster than any tool on the market today
  • Used with a “D” handle, it can easily saw through ice in a pond, lake or river
  • Available with a straight pole on Fiberglass and Steel models or a D-handle on Fiberglass Models
  • Fiberglass or steel pole
  • Fiberglass pole comes standard with the gas shut-off
  • Steel pole comes standard with the pry end
  • Fiberglass available lengths: 32″ with D-handle, 40″ with D-handle, 4′, 5′, 6′, 8′, 10′, 12′, and 14′
  • Steel available lengths: 4′, 5′, 6′, 8′, and 10′

Additional information




4 ft. (1.21 meters), 5 ft. (1.52 meters), 6 ft. (1.83 meters), 8 ft. (2.4 meters), 10 ft. (3.05 meters), 12 ft. (3.6 meters), 14 ft. (4.27 meters), 32 in. w/ D-Handle, 40 in. w/ D-Handle




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Ask an Expert