True 4″ Drop Point 5 Pack Replacement Blades

$18.99

SWIFT EDGE® is TRUE’s patented replaceable blade system that provides the versatility to quickly swap out dull blades or change blade styles to adapt to shifting scenarios from fishing, hunting, and camping to work, every-day carry (EDC) and personal defense. This set includes five (5) 4” drop point blades that are precision engineered from 5Cr13 steel with a factory sharpened fine edge to ensure clean cuts with minimal effort. The drop point blade shape is an all-around design making it ideal for slicing, general utility and EDC uses. The blades are packed in transparent plastic sleeves and do not include a case unless otherwise denoted on the packaging.

In stock

Part Number: TRU-FMK-1012
SKU: TRU-FMK-1012 Categories: , , , , , , ,

Description

Compatible with any TRUE SWIFT EDGE 4” Folding Knives:
TRU-FMK-1002 – SWIFT EDGE 4” TPR (Blue)
TRU-FMK-1005 – SWIFT EDGE 4” TPR (Orange)

INSTRUCTIONS

IMPORTANT: It is advised to always handle the blades by the dull, spine side to keep your fingers furthest away from the sharp edge to prevent risk of injury.

BLADE REMOVAL
1. Carefully unfold the knife and push the toggle lock thumb stud to the unlocked position. A yellow dot will be visible on the opposite side of the toggle lock.
2. Grip the knife in your hand and use your thumb to push down on the blade release located on the retention support.
3. With your opposite hand, carefully pinch the sides of the blade and slide it out. Be sure to handle the blade from the dull side so the sharp edge is oriented away from you and your hand.
4. Lift your thumb off the blade release.
BLADE INSTALL
1. Carefully unfold the knife and push the toggle lock thumb stud to the unlocked position. A yellow dot will be visible on the opposite side of the toggle lock.
2. Insert a blade by sliding it into the retention support until it clicks into place. Be sure to handle the blade from the dull side so the sharp edge is oriented away from you and your hand.
3. Push the toggle lock thumb stud to the locked position.
4. Pinch the blade by the dull side and gently pull to ensure it is secure.

Additional information

Availability

Ask an Expert

Name(Required)

Related products