Your cart is currently empty!
Harken Industrial Ninja™ Foot Ascender
The dual cam system prevents accidental kick-outs. The rope stays in place until the user is ready to release it intentionally. The Ninja is the only foot ascender that can be used on either foot.
The Ninja uses a transverse ribbed cam as opposed to other designs that rely on aggressive teeth that are known to damage rope.
Dual cam system (based on Harken’s marine Cam-Matic® ball bearing cleats) applies pressure to both sides of the rope simultaneously. This provides more thorough holding power than competitive designs that press just one side of the rope against just one side of the ascender’s wall.
|Minimum line Ø (mm)||8 mm|
|Minimum line Ø (in)||5/16 in|
|Maximum line Ø (mm)||13 mm|
|Maximum line Ø (in)||1/2 in|
|Maximum rated load (kN)||1.5 kN|
|Maximum rated load (lb)||330 lb|
|Width (mm)||83 mm|
|Width (in)||3.3 in|
|Height (mm)||74 mm|
|Height (in)||2.9 in|
|Weight (g)||175 g|
|Weight (lb)||0.4 lb|
|Cam material||Stainless steel|
|PRODUCT NAME||WEIGHT||DIMENSIONS (W X H)||ROPE DIAMETER||MATERIAL||CAM MATERIAL||MAXIMUM RATED LOAD (MRL)|
|HARKEN NINJA FOOT ASCENDER||175 G (0.4 LB)||83 X 74 MM (3.3 X 2.9 IN)||8 – 13 MM (5/16 – 1/2 IN)||ALUMINUM||STAINLESS STEEL||1.5 KN (330 LB)|
Only logged in customers who have purchased this product may leave a review.