Contact us to purchase


Available in either single- or double-sided racks.

Mobile Ready Rack units consist of two levels of open wire shelves uprighted on four 74" tall posts that accept shelves on one-inch centers. Posts accept four 5" diameter, nonmarking, swivel casters; two with foot operated brakes. One hanging pole is supplied under top shelf for single-sided units; two hanging poles for double sided units.

Compartments are separated with full-length grid dividers. Dividers are made up of six 68" tall, 1/4" diameters steel rods with attached 4" tall top divider. Units are supplied with 4" tall perimeter ledges for the sides of units, on both shelf levels to contain gear. Single-sided units are also supplied with 4" tall back ledges on both shelf levels. Each compartment is supplied with one Dry Kwik Coat hanger, one 6" tall Helmet Holder, two hanging hooks for bunker pants and one plastic nameplate with label. Glove Dry Hangers and Helmet Holders are available as options.

All units are quoted complete. No tools or additional hardware needed.

Specify 3, 4, 5, or 6 compartments (double for double-sided) when ordering

Ready Rack Chrome Turnout Gear Racking

Ready Rack Chrome Turnout Gear Racking

:: Specifications

  • Dimensions: 21" deep x 72" long x 79" tall
    • Double-sided is 36" deep
  • Weight capacity: 700 pounds overall unit; 600 pounds per shelf.
  • Assembly time: Thirty minutes per unit, with two assemblers.
  • Compartment widths:
    • 3 - 24"
    • 4 - 18"
    • 5 - 14.4"
    • 6 - 12"

:: Features

  • Full length dividers prevent gear from sliding to one end when used on Mobile racks.
  • Full length dividers keep gear separated eliminating confusion.
  • Back ledges on top and bottom hold gear in place.
  • Bunker pants hooks hold wet pants open for air drying.
  • Dry-Kwik hangers hold turnout coat open for air circulation while protecting and accelerating drying time.
  • Helps reduce the possibility of steam burns.
  • Open wire industrial strength shelving with 9-gauge mat wires, 4 & 7 gauge truss wires and 4 gauge support wires.
  • Finish is nickel plated, chrome plated, and clear coated chrome sealer.

Sponsored Links:

Font Size: Decrease Font SizeIncrease Font Size Switch views: Normal View Printer-Friendly View What's this?